well it has been a while, sorry to have neglected you but I have had my hands full with my new business. Also due to the restrictions on image sharing it has been increasingly more difficult to get examples of the type of work I rattle on about. So without further ado, a post about pelmets!!
O.K. lets just clarify what I mean when I say PELMET.
Pelmets are hard flat box dressings that go across the top of blinds, curtains and even beds. They are usually made out of essex, ply or bucrum. (I personally would not recommend bucrum as it has a tendency to warp, especially on bigger items, also they tend not to have a sharp return to the wall ) . They can be shaped or flat. Interlined or padded using foam.
Traditionally they were attached to pelmet boards using tape stitched to the top back edge of the pelmet then tacked to the board (occasionally they still are). These days strong Velcro is used and additionally a panel pin is put in at the side to stop the returns popping out. The fabric can be lifted over the tack to disguise as best as possible. Thinner fabrics are obviously harder to hide the tack with. Tacks can sometimes be hidden with a trim such as a braid.
When measuring and designing a pelmet there are crucial things to take into consideration.
- How much space have you got to play with above the window / door.
- Does the door / window open in or out.
- Is there coving, beams and / or a picture rail, how big and where are they positioned.
- What is going under the pelmet.
- The pattern on the fabric.
I will answer the above in order to clarify exactly how these points effect the style and design of the pelmet.
How much space have you got to play with above the window / door.
This is an obvious one. You need this to help with the depth of the pelmet and also how the item will be fitted to the wall or even the ceiling when there is no “dead light” (name for wall above the window or door). This helps you to decide what brackets to use and where to position them or if you have to drill into the ceiling. Sometimes beams are in the way, a skilled designer / manufacturer can sometimes create pelmets to cut out and fit round beams, more than one measure is required at times for this so that templates can be created for accuracy.
White Wolfe Interiors . www.facebook.com/whitewolfeint
Does the door / window open in or out.
Again a really obvious one but one that can be easily looked over. If the window or door opens in, the pelmet has to be positioned so as not to hinder it opening.
White Wolfe Interiors. www.facebook.com/whitewolfeint
Is there coving, beams and / or a picture rail, how big and where are they positioned.
In some cases there is coving you have to either shape round or cut out in order to position a pelmet where you want or need it. The same goes for picture rails. Exacting sizes need to be taken as well as templates of what to are shaping round. Also being very careful when fitting into a gap /dorma space.
Finishing touches interiors. http://www.finishingtouchesinteriors.co.uk/
What is going under the pelmet.
This piece of information effects the depth as well as the projection. The height of the pelmet as well as what is under it is integral to the balance and proportion the the finished article. Scale drawings may be needed to play around with this to get it just right. Work on fifths and thirds, then adjust accordingly. It is not an exact science, it is what looks right in the end. The projection is controlled by the size of item under the pelmet and the rail being used. E.g = curtain heading projection, stack of blind or is it just a pelmet dressing on its own in which case very little projection is needed to stop it looking like there is something missing.
Edward Grace Interior Design
White Wolfe Interiors
Finishing touches interiors. http://www.finishingtouchesinteriors.co.uk/
The pattern on the fabric.
I have mentioned this briefly in the “Pattern Perfect” blog. Centralising a pattern can dictate and the depth of a pelmet, you can also shape around a pattern, or even turn the fabric on the side and run it across the pelmet. Can you use the fabric in a way so as to avoid seams on the fascia (a preferable look)? Centralising a pattern always enhances the look of the finished design.
One thing I strongly recommend is when putting a pelmet inside a bay window, please get it professionally measured and made. They can be very tricky and require more than one fitting in most cases. Boards first then a check measure, make the final item and fit.
Designed by K.White (White Wolfe Interiors)
When putting pelmets into dorma’s / recess of windows, I generally recommend having no returns on them. This is primarily due to the return stopping the item underneath fitting as close to the wall as possible. The extra bulk of a return increases the gap from item to wall (not ideal in my mind).
Shaping On A Pelmet
Shaping is to be carefully considered and I would recommend scale drawing before hand just to make sure it fits with the pattern, size of the window, and is in keeping with the item underneath. You can do all sorts with pelmets beyond shaping. You can add trims, layers as well as additional padding (wadding) to add to the luxury of an item.
Items 1,2 & 4 = Fox Ridge Interiors@Foxridgeinteriors
Item 3 = Finishing touches interiors. http://www.finishingtouchesinteriors.co.uk/
Into The Window
Be very aware ( especially when shaping) that the wall is still covered, particularly in the situation of curtains being used. Ideally you do not want wall showing. Unless there is a restriction I recommend a minimum of 3″ going into the window / past the reveal. It is also worth mentioning that depending on how tall you are or where you are stood in the room effects how far the pelmet can go past the reveal to cover the wall and underside of the inside of the window. I recommend holding a tape measure up, standing back and seeing where you are happiest the pelmet ending.
Curved (bow ) pelmets are particularly difficult to measure and construct. Different manufacturers work differently. Some score the back of the board so the ply bends and some use flexible ply. You must be very aware that the more curved the bay the more the fabric can ripple. Some people construct on site and some don’t or only do partial construction. But all bays and bows need more than one fitting / measure.
Designed by K.White @ White Wolfe Int
It is amazing how a pelmet is constructed. Once you understand that it is a highly skilled craft to design and create a pelmet you then appreciate the cost involved. The manufacturer is actually upholstering a shaped construction, many accurate measurements are applied, the craftsmanship of a wonderful pelmet is simply sublime.
Multiple window sizes and shapes must also be taken into consideration at the design phase. Balance and unity of the design must at all times be considered, with the consideration of the overall look of the room at the heart of the design. In the design below the bottom of the contrast on the curtain is designed to be in line with the base of the pelmet on the other window, also the pattern on the blind is level with the pattern on the curtain
Designed by K.White @ White Wolfe Int www.facebook.com/whitewolfeint
I do hope you have enjoyed this post and want to thank all the designers who have contributed their beautiful work.
Kind Regards and please look out for my next post.